触控面板专用贴合UV胶


• 高接着性、低收缩率。 
• 耐湿、耐寒、耐热、耐冷热冲击,皆有优异的性能。 
• 各种高低黏度对应,依客户需求调整。 
• 高透明性极佳。 
• 常温保存,安定性佳。
• 可轻易重工。

编号 外观 黏度 反应波长 折射率 应用 特长
UO-108 无色透明液体 800cps 365nm+Visible Light 1.49 TP 60℃ / 90% / 1,000hr
UO-120 无色透明液体 2,300cps 365nm+Visible Light 1.49 TP 60℃ / 90% / 1,000hr
UO-132 无色透明液体 3,400cps 365nm+Visible Light 1.49 TP 60℃ / 90% / 1,000hr
UO-400 无色透明液体 40,000cps 365nm+Visible Light 1.49 框胶 高摇变性
UO-250 无色透明液体 2,500cps 365nm+Visible Light 1.49 LCM 低收缩率

三怡实业 LOCA紫外光硬化树脂 / UO-108,UO-120,UO-132
SUNEAST LOCA UV curable resin / UO-108,UO-120,UO-132


特性
Characteristics
本产品为应用于触控面板贴合专用光学级紫外光硬化接着剂,对Glass, ITO/Glass, PMMA,以及其他塑胶材料有很好的贴合能力,。在室温(25℃)下, 产品的黏度,UO-108具有约800 cps, UO-120具有约2000 cps, UO-132具有约3200 cps。此产品的透光行高, 其耐候性以及耐冷热冲击能力优异, 非常适用于触控面板的贴合应用。

These glues are the UV curable optical adhesives and suitable for the application of the touch panel manufacturing。They are applicable to the substrates of glass, ITO/glass, PMMA and other plastic materials。 At the room temperature (25℃),UO-108 has the viscosity of about 800cps,UO-120 has the viscosity of about 2000cps, and UO-132 has the viscosity of about 3200cps。 They have very high light transparent property。The weather resistance and thermal shock cycle resistance are excellent。


产品内容
Profile
化学成分 (Component)压克力类(acrylate or methacrylate)
外观 (Appearance)澄清透明液体(clear and transparent liquid)
溶解性 (Solubility)酮类(acetone)
折射率(Refractive index)1.49/25℃
固含量(Solid Content)100%
毒性 (Toxicity)低(low)
黏度 (Viscosity)800±150 cps (UO-108)
2000±250 cps (UO-120)
3200±300 cps (UO-132)
〔25℃ (Brookfield DV-I) 〕
剪切强度(Shear strength)
    玻璃-玻璃(Glass-Glass)9N/mm²
硬化能量(Curing energy) 900mJ/cm²
硬化深度(Depth of cure) 5mm
耐候性(Weatherability) 60℃、90%RH、1000小时 通过
80℃、300 小时 通过
-40℃、300 小时 通过
冷热冲击(Thermal shock test) -40~80℃,50cycles每段30mins 通过
硬化条件(Curing Condition)
灯源波长 Wavelength 灯源强度 Intensity 硬化时间 Exposed time
320~450nm100mW/cm²10s

包装方式 Package 不透光褐色塑胶容器,内容物 1 公斤、5 公斤
Opaque brown plastic container, quantity: 1 kg . 5kg

使用建议 Instruction
1.在使用胶前,接着材表面需清洁干净才能达到最佳的接着效果。
2.固化速度取决于光源强度、与光源的距离、照射时间、接着间隙及材料的UV透光度。
3.建议使用的灯源光强度范围为30mW/cm²~100mW/cm²之间,紫外光波长范围为300~450nm。
4.过多的未固化溢胶可以丙酮擦洗清除。
5.接着材在承受任何测试或负载前,必须至少冷却30分钟。
1.For the best performance, bonding surfaces should be clean.
2.Curing rate is dependent on lamp intensity, distance from light source, exposure time, bonding gap and the intensity of pervious to UV light of bonding substrate.
3.Recommended intensity for cure in an adhesive application is 30mW/cm²~100mW/cm², and wavelength is 300~450nm.
4.Excess uncured adhesive can be wiped away with acetone.
5.Bonds should be allowed to cool for 30 minutes at any rate before subjecting to any test and service loads.

注意事项
Note
1.避免曝露于阳光或室内光线下。
2.避免呼吸到其蒸气。
3.使用时应使用防护措施,不可直接接触眼睛及皮肤。
1.Avoid exposure to light.
2.Never breathe product vapors.
3.Avoid any contact with eyes, skin by wearing full protective gear.

保存方式 Storage
1.理想储存温度为8~25°C。如将产品存放于理想储存温度之外,可能会影响产品性能。
2.本产品储存于适当温度环境,未开封状态下有效期六个月。
3.已取出包装瓶之产品有可能会受到污染,为避免未使用之胶材受到污染请物将任何的胶材倒品原包装瓶中。
1.Optimal storage temperature is 8°C to 25°C (46°F to 77°F) . Storage out of this temperature range can adversely affect product properties.
2.Shelf life is 6 months when stored under these conditions out of sunlight and in original, unopened containers.
3.Glue removed from containers may be contaminated. Do not return glue to the original container.










玻离薄化制程密封胶 Glasses Thinner Process
UV胶主旨为产品的保护装置,以防止后段制程蚀刻液与研磨液的渗入。

网路相关资讯:
* OGS触控结构精简 贴合与玻璃厂角色将式微








◎ IMD、IMF、IML、IMR、RFID
→面层Hard-coating
→接着层-热熔胶

◎ 医疗导管粘着

◎ Touch Panel 光学级水胶 , Cover lens + 面板

◎ Smart Card 晶片卡 , 晶片封装胶

◎ 手机按键 KEY

◎ LCD面板→封孔胶、模组胶

◎ 玻璃+金属+塑胶+木器..等 →复合胶

应用范围:

粘接多种基材,广泛用于医疗器、工业材等。
适用粘接: PVC、PC、PET、ABS、TPU、Acrylic、聚醚醚酮、PS、复合材料、玻璃钢、玻璃、金属等。
用于一次性医疗器械、装饰件及多品种塑料集束等。

产品特点:

高接着强度、无重金属成份、无毒性物质..等。
高性能单组分紫外光固化接着剂经UV紫外光照射数秒,即固化成为耐冲击,耐候的柔性胶膜。





台湾 Taiwan 香港 Hong Kong 大陆 China 柬埔寨 Cambodia
三怡实业有限公司
33353桃园县龟山乡大埔路45号
No.45, Dapu, Guishan Township, 
Taoyuan County 33353, Taiwan
陈经理
电话:886-3-3508928
传真:886-3-3295066
电子信箱: [email protected]
电子信箱: [email protected]
Skype: igor.chen
QQ 帐号: [email protected]

台南联络处
台南市麻豆区三民路57之3号7F 
Tel:06-5722608   
许耀庭先生 0915255750

吉田盛夫工业材料有限公司
香港九龙尖沙咀加拿芬道20号
加拿芬广场10字1006室
吕总
手机:97185802
电话:852-3607-3777
传真:852-3013-8205
吉田盛夫工业材料有限公司
广东省东莞市常平镇 
漱旧村工业区
吕总经理
手机:13927317801
电话:0769-8108-8381
电话:0769-8108-8261

SE Resin
605 No 87, Street 63, 
Sangkat Boeung Raing, 
Khan Daun Penh, Phnom Penh, 
Cambodia
Ian Chen / Sales Manager
[email protected]
Phone:+855-884450597